- Remove the barrel and recoil spring from the slide.
- Insert a putty knife or the like between the extractor and the firing pin housing inside the slide. Leveraging the putty knife to free the extractor from its retaining groove in the slide, rotate the extractor 90 degrees out of the slide.
- Wiggle the extractor outward from its groove on the slide. The extractor holds in a small transverse dowel that retains the firing pin inside its channel in the slide. Use a drift pin or a safety clip to push the dowel outward from the other side of the slide. Lastly, remove the firing pin along with its captured spring.
- Reassemble in reverse order after clearing the firing pin channel. Do not lubricate the firing pin.
sig p210 rimfire slide disassembly
In Politics III.9.1280a7–22, Aristotle agrees with the thought that equality is just, but points out that it is not so for everybody, but…
“Ma, sendo l’intento mio scrivere cosa utile a chi la intende, mi è parso più conveniente andare drieto alla…
Hear ye, hear ye! David W. Affeld and I will appear in person for the hearing on my appeal of denial of my application to the City of Menlo…